In this comprehensive guide, we will walk you through the process of installing the RTL8188EUS driver on Ubuntu 18.04. This driver is required for some wireless network adapters, and installing it can be a bit tricky. However, with this step-by-step guide, you should be able to accomplish it with ease.
Prerequisites
Before we start, make sure you have the following:
- Ubuntu 18.04 installed on your system.
- Access to a terminal and basic familiarity with command line instructions.
- The RTL8188EUS wireless network adapter connected to your system.
Step 1: Update Your System
First and foremost, we need to ensure your system is up-to-date. Open your terminal and run the following commands:
sudo apt update sudo apt-get install -f sudo apt-get dist-upgrade
sudo apt update updates the list of available packages and their versions, but it does not install or upgrade any packages.
sudo apt-get install -f fixes broken dependencies.
sudo apt-get dist-upgrade upgrades packages and will handle changing dependencies with new versions of packages.
Step 2: Install Necessary Packages
Next, we need to install some packages that are necessary for building the driver. Run the following command:
sudo apt-get -y install dkms build-essential git
dkms is a framework that allows kernel modules to be dynamically built and loaded.
build-essential contains a list of packages which are considered essential for building Ubuntu packages including gcc compiler, make and other required tools.
git is a version control system that lets you manage and keep track of your source code history.
Step 3: Clone the Driver Repository
Now that we have the necessary packages, we can proceed to download the driver source code. We will clone the driver repository from GitHub using git. First, create a directory to build the driver and navigate to it:
mkdir ~/DriverBuild cd ~/DriverBuild
Then, clone the driver repository:
git clone https://github.com/lwfinger/rtl8188eu.git
Step 4: Build and Install the Driver
Navigate to the cloned repository:
cd rtl8188eu
Then, build and install the driver using the following commands:
make sudo make install
make command reads the makefile in the current directory and compiles the code.
sudo make install command installs the compiled code into the appropriate directories in the system.
Step 5: Reboot Your System
Finally, reboot your system to load the newly installed driver:
reboot
Troubleshooting
If you encounter the error “implicit declaration of function ‘init_timer’,” it may be due to compatibility issues with your kernel version. In that case, you can try alternative driver repositories mentioned in the comments.
For example, if you have kernel version 4.17, you can use the repository at github.com/quickreflex/rtl8188eus.
If you have kernel version 5.1 or below, you can try the repository at github.com/kelebek333/rtl8188fu.
Remember to follow the specific build and installation instructions provided in each repository.
Conclusion
Congratulations! You have successfully installed the RTL8188EUS driver on Ubuntu 18.04. Now your RTL8188EUS wireless network adapter should be functioning properly. Remember, it is recommended to use a USB 2.0 port for the RTL8188EUS adapter to ensure compatibility and optimal performance. If you face any issues, don’t hesitate to refer back to this guide or seek help from the Ubuntu community. Happy computing!
Conclusion: So above is the How To Install RTL8188EUS Driver on Ubuntu 18.04 article. Hopefully with this article you can help you in life, always follow and read our good articles on the website: natuts.com
